OB Low Deflection Shafts to fit Viking Cues

If you have a Viking Cue and are looking for an OB Shaft to fit it, then you most likely have either a Viking Quick Release joint or a standard 5/16×18 Joint in your cue. The Viking Quick Release joint is by far the most common and is basically a 5/16×18 joint that is quick release.

If you look at the pin coming out of the butt of your cue and the threads do not go all the way up the joint pin, then you have the Viking Quick Release joint. If the entire joint pin has threads, then you have a standard 5/16×18 joint. Note that usually the only Viking Cues that have a standard 5/16×18 joint are much older cues. 

To see all of the shafts that we offer that will fit your Viking Cue you if you have the Viking Quick Release joint, you can click HERE 

To see all of the shafts that we offer that will fit your older Viking Cue if you have a standard 5/16×18 joint, you can click HERE

If you are wondering why you should choose an OB shaft, then you should click HERE

If you are not sure which OB shaft is right for you, then you should click HERE